Ultra Start 42 SERIES, Owner'S Manual

OWNER’S MANUAL

                                                      REMOTE VEHICLE STARTER

      PAGE 6

Remote Star ter Functions

Remote Starting 

(if remote start fails to start see page 15)

1. Press and release the  

 button. 

2. The park lights will flash and the siren will chirp once to confirm. 
    The vehicle will then remote start, the siren will chirp and the park
    lights will then flash four times then remain on while the vehicle is running.*

Turbo Timer Mode

1. While the vehicle is running with key, press the 

button. 

2. The park lights will turn on and the siren will chirp twice.
3. Turn the ignition key off and the vehicle will continue to run for approximately 
    2 minutes.

NOTE:

 Reservation Mode on “M” series will not set if Idle mode or Turbo Timer 

            mode are being used.
                                                                                            *(Default 15 minutes)

Idle Mode

1.While the vehicle is running with key, press and release the  

 button. 

2.The park lights will turn on and the siren will chirp twice.
3.Turn the ignition key to the “OFF” position and the vehicle will remain running*

Remote Stop

1. While the vehicle is running with the remote starter, press and hold the 
     

 button for three seconds. The remote starter will shut down. 

2.The park lights will flash and the siren will chirp 2 times to confirm
   shutdown.

NOTE:

 Pressing the brake pedal or opening the hood will also shut down the

            remote starter.

Extended Run Time

1. While the vehicle is running with the remote starter, press and release the   
     

button. 

2. The park lights will flash and the siren will chirp one time to confirm.
    The system will reset the run time.*

NOTE:

 Not available with 4 minute run time.