1. The system must be disarmed and the ignition is turned OFF.
2.Press and release the lock and unlock buttons at the same time, then
press and hold the lock button for five seconds.
3.The system will respond with
five chirps
and park light flashes to
confirm that the system is in Valet mode.
4. The LED will stay
ON
steady to confirm Valet Mode.
1.Press and release the lock and unlock buttons at the same time, then
press and hold the lock button for five seconds.
2.The system will respond with
two chirps
and park light flashes to confirm
that the system has exited Valet mode.
3. The LED will turn
OFF.
Note:
If the LED does not turn off, check that all the door’s are closed.
The LED stays on solid when a door is left opened.
Service Mode
Exit Service Mode
Emergency Service Mode
Ignition Controlled Door Locks
Starter Disable
The system has an optional starter disable output that can be connected
by your dealer. When the starter disable relay is installed and connected
to the system, the vehicle’s starter will be disabled when the system is
armed.
To activate
the starter disable press the lock button on the remote. The
system will arm and the starter will no longer operate.
To deactivate
the starter disable, press the unlock button and the LEDS
will stop flashing and the starter will be re-enabled.
Optional Programmable Feature
- This feature will automatically lock the doors two seconds after the ignition
key is turned to the
“On”
position.
- The doors will unlock when the ignition key is turned to the “off” position.
Emergency Service Mode temporarily disables the alarm system. This
feature can be used if the remote is lost or if the system malfunctions.
ENTERING VALET MODE
1.While the ignition is “On” press and hold the Service button for five
seconds. The siren will chirps f
ive
times.
2.Alarm functions will be disabled and the LED will be
ON
steady. The
door-locks and trunk release are still operational.
EXITING VALET MODE
1.While the ignition is
“On”
press and hold the Service button for five
seconds. The siren will chirps
two
times.
2. The system returns to normal operation
.
Ignition
On/Off
Ignition
“ON”
Press for
5 seconds
