background image

PAGE 10

72 SERIES

OWNER'S  MANUAL

SYSTEM OPERATIONS

  

CAR FINDER MODE

SILENT LOCK / SILENT UNLOCK 

1.  Press and HOLD the Lock Button for three seconds.
2.  
3.  The park lights will begin to flash and the horn will honk ON and OFF.
4.  To turn off panic, press Lock or Unlock Buttons on remote.
5.  If no button is pressed, Panic will stay active for 1 minute then turn off

.

The doors will lock.

Panic Mode

 is a personal protection feature that allows you to activate your alarm from the 

remote transmitter. This feature can be used to draw attention to your vehicle if you feel 
threatened.

1.   PRESS & HOLD The # Button on the remote transmitter for 5 seconds.
- The horn will honk 5 times and the park lights will flash 5 times.

This feature helps in locating your vehicle in a crowded parking lot. It allows you hear and see 
your vehicle from a distance.

*The horn output must be connected and this feature must be programmed on..

1.  Press then release the Lock & Unlock buttons together.
2.  If the system is UNLOCKED, it will Lock the doors with no horn honks. The park 

lights will flash 1 time.

3.  If the system is LOCKED, it will Unlock the doors with no horn honks. The park 

lights will flash 2 times.

PRESS & HOLD for 3 sec

PRESS TOGETHER

ACTIVATE PANIC MODE

PRESS HOLD

+

PAGE 11

72 SERIES

OWNER'S MANUAL

SYSTEM OPERATIONS

The Aux output can be programmed for a variety of custom applications. (SEE 
DEALER FOR DETAILS)

1. To activate  Auxiliary Channel 1 output press and hold the # Button for 3 seconds.
2. The system will unlock the doors then the AUX 1 output will activate.
3. Release the buttons for a momentary output or continue holding for up to a 5 
second output.

This feature can be used to open the trunk, open or close power windows or control 
sliding doors on minivans.

The Aux output can be programmed for a variety of custom applications. (SEE 
DEALER FOR DETAILS)

1. To activate  Auxiliary Channel 2 output press and hold the Unlock Buttons for 3 
seconds.
2. The system will unlock the doors then the AUX 2 output will activate.
3. Release the buttons for a momentary output or continue holding for up to a 5 
second output.

This feature can be used to open the trunk, open or close power windows or control 
sliding doors on minivans.

AUXILIARY OUTPUT 1

AUXILIARY OUTPUT 2/ TRUNK RELEASE

Having the Auxiliary output options connected is subject to addition labour and 

parts. Some features and functions are not available on all vehicles.

HOLD UNLOCK

HOLD THE # BUTTON

Note- The 1172 can only control features related to the Unlock and Start buttons.

Summary of Contents for 72 SERIES 1272





















Reviews: