background image

PAGE 8

72 SERIES

OWNER'S  MANUAL

SYSTEM OPERATIONS

 TRUNK RELEASE/ AUX 2 OUTPUT

1.  Press then HOLD the Unlock Button on the remote transmitter.
2.  The park lights will flash and the horn (optional) will honk two times.
3.  The doors will unlock and the dome lights will activate. (optional)
4.  The LEDs will stop flashing.
5.  Continue to HOLD the Unlock Button until the trunk release activates.

NOTES:

 

 - For safety, the trunk release will not active when ignition key is ON.

** Optional Feature may require additional parts and labor.

PRESS & HOLD

  

1.  Press and release the Lock Button on the remote transmitter. 
2.  The park lights will flash and the horn (optional) will Honk one time. 
3.  The doors will lock.
4.  The LED will start flashing within five seconds.

- The horn can be programmed to honk with Car Finder and Panic Mode only.

 - If the system is in Service Mode the doors will lock/ unlock but the horn will not honk.
 - The LEDs will be on solid if the system is in Service Mode. 

See Valet / Service Mode in this manual for further information

NOTES:

 

 - If the panic mode is activated pressing the lock button on the remote will stop the horn 

from sounding.

 

** Optional Feature may require additional parts and labor.

NEW- 

The LEDs can now be programmed not to flash when the doors are locked by 

the remote transmitter.

Note- The 1172 can only control features related to the Unlock and Start buttons.

LOCK DOORS

PRESS & RELEASE

PAGE 9

72 SERIES

OWNER'S MANUAL

SYSTEM OPERATIONS

DRIVER'S DOOR PRIORITY UNLOCK

1.  Press then release the Unlock Button on the remote transmitter.
2.  The park lights will flash and the horn (optional) will honk two times.*
3.  The driver's doors will unlock and the dome lights will activate. (optional)
4.  The LEDs will stop flashing.
5.  Press the Unlock Button a second time within 3 seconds and all of the other doors 
will unlock.*

*This is an optional feature that may not be available on all vehicles.

** Optional Feature may require additional parts and labor.

UNLOCK DOORS

1.  Press then release the Unlock Button on the remote transmitter.
2.  The park lights will flash and the horn (optional) will honk two times.
3.  The doors will unlock and the dome lights will activate. (optional)
4.  The LEDs  will stop flashing.

- The horn can be programmed to honk with Car Finder and Panic Mode only.

 - If the system is in valet mode the doors will lock/ unlock but the horn will not honk.
 - The LEDs will be on solid if the system is in valet mode. 

See Valet / Service Mode in this manual for further information

NOTES:

 

 - If the panic mode is activated the first press of the unlock button will turn off the horn off and 

the second press will unlock the doors.

 

** Optional Feature may require additional parts and labor.

PRESS & RELEASE

PRESS TWICE

Note- The 1172 can only control features related to the Unlock and Start buttons.

Summary of Contents for 72 SERIES 1272





















Reviews: