Page 4 of 7
2. Adjust the light body (1) to a desired angle, then insert the M3 x 17 Hex socket cap screw
（
3
）
to hole on the bracket(4) and tighten it. (See Figure 2)
3. Run the M6 x 35 Hex socket cap screw
（
5
）
from the bracket (4), Rubber mat
（
6
）
,
Mounting surface, then attach the M6 hex nut
（
7
）
. (See Figure 3)
Figure 2
Figure 3
Mounting Surface
