background image

Maintenance: 

CAUTION

: Turn off and unplug unit from power before any maintenance is 

performed.  

GENERAL INFORMATION: 

The cellulous media used in these portable evaporative coolers must be kept in 
good condition to maintain the stated cooling capabilities. We recommend draining 
the unit weekly and refilling to keep water fresh and reduce mineral build-up on 
media. 

Weekly

 

Draining

 

(Accomplish when water level is low or unit is out of 
water.) 

1.  Turn unit off. Unplug and move it to an area that 

will not be damaged by water. 

2.  Unscrew the drain cap from the bottom of the 

back of the unit. Allow any remaining water to 
drain out of unit. 

3.  When cleaning the media pad, try to preserve 

the integrity of the fluted surface. 

4.  Reinstall drain cap and refill with fresh water. 

Plug in and operate per instructions. 

Regular Servicing: 

(Accomplish at least twice a season, more often in 
areas with hard water.) 
1.  Remove media frame section by extracting one 

screw from center of upper grate. 

2.  Using a water hose, wash out back with fresh 

water. Clean media pad. DO NOT use chemicals 
or pressure washer on media.

 

3.  Using a screw driver or other tool, pry off the four 

keeper discs, then push the stems back through 
the media and extract them through the back. 
Remove pad.

 

4.  Rinse media with water. Light scrubbing may be 

necessary. Be careful not to damage the media.  

NOTE:

 Average life expectancy of the rigid media 

pad is 2 years, though water with high mineral content 
will deteriorate the integrity of the media sooner. 

 

 

STEM

KEEPER 

DISC

Summary of Contents for CP35









Reviews: