background image

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Cooler Limited Warranty policy 

SALES RECEIPT REQUIRED AS PROOF OF PURCHASE FOR ALL 
WARRANTY CLAIMS. 

This warranty is extended to the original purchaser of an evaporative 
cooler installed and used under normal conditions. It does not cover 
damages incurred through accident, neglect, or abuse by the owner. We 
do not authorize any person or representative to assume for us any 
other or different liability in connection with this product. 

Terms and Conditions of the Warranty

 

For One Year from date of purchase, we will replace any original 
component provided by Champion Cooler which fails due to any defect 
in material or factory workmanship only. 

Exclusions from the Warranty

 

We are not responsible for replacement of evaporative media. These are 
disposable components and should be replaced periodically. We are not 
responsible for any incidental or consequential damage resulting from 
any malfunction. 

We are not responsible for any damage

 

received from the use of water 

softeners, chemicals, de-scale material or plastic wrap. 

We are not responsible for the cost of service calls to diagnose the 
cause of trouble, or labor charge to repair and/or replace parts. 

How to Obtain Service Under this Warranty

 

Contact the Dealer where you purchased the evaporative cooler. If for 
any reason you are not satisfied with the response from the dealer, 
contact the Customer Service Department: Champion Cooler, 5800 
Murray Street, Little Rock, Arkansas 72209. 1-800-643-8341or 

at 

info@championcooler.com 

Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above may not apply to you. 

This warranty gives you specific legal rights, and you may also have 
other rights which vary from state to state. 

This limited warranty applies to the original purchaser only. 

 

Register your cooler on line  at: www xxxx.xxxxx 

Summary of Contents for CP35









Reviews: