background image

SINGLE LEVER CONTROL B301 AND B302

   

-  

page 5 

of 47

Installation and maintenance  manual

ULTRAFLEX

E

N

G

L

ISH

WARRANTY

ULTRAFLEX 

 warrants that its products are built according to the standards of good workmanship and are free

of  defects  in  materials  and  workmanship.

This warranty is valid for two years starting on the date of manufacture with the exception of cases in which

products  are  installed  and  used  on  working  vessels  or  on  vessels  commercial  use,  in  which  case  the

guarantee  is  limited  to  1  year  from  the  date  of  manufacture.

This  warranty  is  limited  to  free  replacement  or  repair  of  the  item,  which  must  be  returned  carriage  paid,

provided  we  find  it  to  be  effectively  defective  in  materials  and/or  workmanship.

The  warranty  does  not  cover  any  direct  or  indirect  damages,  The  warranty  specifically  does  not  cover,  and

we shall not be liable for (except for replacement or repair of defective items under the terms and conditions

set forth above), malfunctioning of our products if their failure or poor functioning is attributable to incorrect

installation  or  to  negligent  or  improper  use.

This  warranty  does  not  cover  products  installed  on  racing  boats  or  used  in  a  competitive  context.  The

descriptions  and  illustrations  in  this  manual  are  indicative  only.

Please  contact  our  Assistance  Service  for  more  detailed  information.

The components of 

ULTRAFLEX 

steering and control systems with EC marked components. (See Art. 3 and Art.

5  of  directive  94/25/EC.)  Note  that  the 

ULTRAFLEX

  warranty  shall  be  automatically  forfeited  if  any 

ULTRAFLEX

components  are  installed  in  a  steering  and  control  system  along  with  products  of  other  brands.

INTRODUCTION

This  installation  and  maintenance  manual  constitutes  an  integral  part  of  the  product  and  must  be  made

easily  accessible  for  personnel  using  the  product  and  performing  maintenance  work  on  it.

The  user  must  know  the  content  of  this  manual.

ULTRAFLEX

 shall not be held liable for any inaccuracies due to printing errors in the manual.

Without altering the basic features of the product described 

ULTRAFLEX 

reserves the right to make any changes to

descriptions, details and illustrations that it may consider appropriate for its improvement or for manufacturing

or commercial reasons at any time, without being required to update this publication immediately.

ALL RIGHTS RESERVED. Rights to publication, trademarks, logos and photographs of 

ULTRAFLEX

 products present

in this manual are the property of 

ULTRAFLEX

and may not be reproduced in full or in part. Great care has been

taken to collect and verify documentation to make this manual as complete and easy to understand as possible.

None of the information obtained in this publication may be interpreted as a guarantee or an express or implicit

condition- including but not limited to, the guarantee of suitability for a particular purpose. None of  the information

contained  in  this  publication  may  be  interpreted  as  a change  to or  assertion  of  the  terms  of any  contract  of

purchase.

The product must be installed by experienced personnel to ensure correct functioning of the product and its

components.  In  the  event  of  breakage  of  the  components  or  malfunctioning,  contact  specialized  personnel

or  our  Technical  Assistance  Service.

WARNING

TECHNICAL ASSISTANCE SERVICE

UFLEX  S.r.l.

Via  Milite  Ignoto,8A

16012  Busalla  (GE)-Italia

Tel:  +39.010.962.01

Fax:  +39.010.962.0333

Email:  service@ultraflexgroup.it

www.ultraflexgroup.it

North  -  South  -  Central  America:

UFLEX

 USA

6442  Parkland  Drive

Sarasota,  FL  34243

Tel:  +1.941.351.2628

Fax:  +1.941.360.9171

Email:  sales@uflexusa.com

www.uflexusa.com

Summary of Contents for B 301

















































Reviews: