POWER ASSISTED STEERING SYSTEM
-
page 11
of 143
Installation, Maintenance and Owner's Manual
ULTRAFLEX
E
N
G
L
ISH
In dual station systems, it is possible to use front and tilt version helms together but they must have the
same cylinder capacity. Always comply with the installation instructions.
NEVER use the Slave helm as single station since it is not equipped with proper safety systems. Refer to the
installation diagram!
A wrong installation will prevent the system from operating properly!
DANGER
NOTICE
NOTICE
For TILT version dimensions, refer to point 1 in paragraph 3.4.
The release pressure of the relief valves is not the one considered for the system normal use but for the
system use in extreme conditions.
WARNING
Model
Mounting
Displacement/ Revolution
Application
Steering wheel max.Ø
Release pressure of
relief valves
UH32-F
front mount
32 cc- 1.95 cu. in
Master helm
Max Ø 711 mm - 28"
Max cone 152 mm - 6"
105 bar (1500 psi)
UH32-T
with X66 tilt
32 cc- 1.95 cu. in
Master helm
Max Ø 508 mm - 20"
Max Cone 152 mm - 6"
105 bar (1500 psi)
UH40-F
front mount
40 cc- 2.44 cu. in
Master helm
Max Ø 711 mm - 28"
Max Cone 152 mm - 6"
105 bar (1500 psi)
UH40-T
with X66 tilt
40 cc- 2.44 cu. in
Master helm
Max Ø 508 mm - 20"
Max Cone 152 mm - 6"
105 bar (1500 psi)
UH50-F
front mount
50 cc- 3.05 cu. in
Master helm
Max Ø 711 mm - 28"
Max Cone 152 mm - 6"
105 bar (1500 psi)
UH50-T
with X66 tilt
50 cc- 3.05 cu. in
Master helm
Max Ø 508 mm - 20"
Max Cone 152 mm - 6"
105 bar (1500 psi)
UHD32-F
front mount
32 cc- 1.95 cu. in
Slave helm
Max Ø 711 mm - 28"
Max Cone 152 mm - 6"
not applicable
UHD32-T
with X66 tilt
32 cc- 1.95 cu. in
Slave helm
Max Ø 508 mm - 20"
Max Cone 152 mm - 6"
not applicable
UHD40-F
front mount
40 cc- 2.44 cu. in
Slave helm
Max Ø 711 mm - 28"
Max Cone 152 mm - 6"
not applicable
UHD40-T
with X66 tilt
40 cc- 2.44 cu. in
Slave helm
Max Ø 508 mm - 20"
Max Cone 152 mm - 6"
not applicable
UHD50-F
front mount
50 cc- 3.05 cu. in
Slave helm
Max Ø 711 mm - 28"
Max Cone 152 mm - 6"
not applicable
UHD50-T
with X66 tilt
50 cc- 3.05 cu. in
Slave helm
Max Ø 508 mm - 20"
Max Cone 152 mm - 6"
not applicable
