10
KCMU000004
06/08/01
BASIC INSTALLATION
, continued
2. Test camera and cables prior to mounting and
running cables.
IMPORTANT:
Contact your authorized Ultrak
dealer/distributor to purchase longer cables.
3. Select a suitable location for the camera
IMPORTANT:
Unless otherwise specified,
cameras may be used in outdoor settings only
when used with approved camera housing.
4. Use a suitable fastener and necessary tools to
mount the camera stand to a structural object that
can support the weight of the camera and the
mount, such as a wall stud, shelf, ceiling rafter,
etc. The maximum recommended load rating for
the bracket is 11 pounds.
5. The KC452xMx/KC652xMx observation cameras
have a 1/4”-20 UNC mounting hole located at the
top and bottom of the camera housing to allow for
bottom or top mounting. Mount the camera onto
the threaded mounting bolt.
IMPORTANT:
Do not aim or point the camera
towards the sun or into a strong light.
Installing
C-Mount or
CS-Mount
Lens
Install the lens. If a C- or CS-mount lens is used,
adjust the back-focal length or picture focus. For C-
mount lenses, rotate the focus-adjust ring
counterclockwise. For CS-mount lenses, rotate the
focus-adjust ring clockwise.
