4.3
PTZ OPERATION, CONTINUED
To run a VectorScan use the
Í
or
Î
arrows to scroll through the dynamic menus until the
[
Vector
] menu is visible. Press [
Vector
] [
Run
] [
number
]
.
Example:
To run vector 2, press [
Vector
] [
Run
] [
2
]
.
Run
VectorScan
To stop a VectorScan, move the joystick when the camera is active.
Program a
VectorScan.
(Only
available
through
Master
password)
Use the
Í
or
Î
arrows to scroll through the dynamic menus until the [
Vector
] menu is visible.
Press [
Vector
] [
Program
].
The Program VectorScan menu appears. Refer to the KD6 operation & programming manual
(518584-2960). for more details. All commands needed to navigate the on-screen menus are
available through the LCD dynamic menus.
TIP:
To move text around the screen press and hold ALT (
) then use the joystick to move
the text.
TIP:
To enter text into a menu, such as the name of a PreShot, press the AUX (
).
This enter a text mode on the LCD display. Use the joystick to scroll through the
available letters. Press Enter to send the text to the KD6.
Run a Tour
(KD6 Only)
To run a Tour use the
Í
or
Î
arrows to scroll through the dynamic menus until the [
Tour
]
menu is visible. Press [
Tour
] [
Run
] [
number
] (
1-3
)
.
Program a
Tour.
(Only
available
through
Master
password)
Use the
Í
or
Î
arrows to scroll through the dynamic menus until the [
Tour
] menu is visible.
Press [
Tour
] [
Program
]. (Use the
Í
or
Î
arrows to scroll through options until [Program] is
visible.)
Select the number of the tour to program (1-3) and press [
Enter
].
Use the joystick to move the KD6 over the desired tour. The length of the tour can be a
maximum of 120 seconds.
Press [
TourStp
] on the dynamic menu to end the tour.
519222-1960 14
KEMU000499
Rev. C
08/23/02
