AutoGo 550 Vehicle Owner’s Manual
EMC Part: 19285600 • Rev. 03 • 09/15/04
10
Charge the batteries as follows:
1.
For your convenience, you can detach the Battery Pack from the AutoGo 550 and move it to a 3-Prong Grounded
Electrical Receptacle. If you choose, you can also park the AutoGo 550 near a 3-Prong Grounded Electrical Receptacle
without removing the Battery Pack.
WARNING!
Use of a non-grounded receptacle could result in an electrical shock.
2.
Use the separate Charger Power Cord, included in kit with this Owners Manual, and plug it into the 3-Prong
Grounded Electrical Receptacle on the rear of the Battery Pack. Your Charger Power Cord is equipped with either a
110V or 220V plug. If you wish to purchase either cord for travel to different countries, contact the Customer Service
Department to purchase a cord for 220V (UK), 220V (Europe), 100V (Japan) locales.
3.
Check that the LED on the rear of the Battery Pack is lit. This indicates that the Charger is recharging the batteries.
4.
Normal charging time is generally 6-8 hours for fully discharged batteries.
5.
Disconnect the Charger Power cord from the Battery Pack and wall outlet. We recommend that you keep the cord in
the storage pouch underneath the seat so it is readily available.
Note:
Do not operate vehicle while charging.
19285600 Rev.03.OM
9/15/04, 5:34 PM
10