AutoGo 550 Vehicle Owner’s Manual
EMC Part: 19285600 • Rev. 03 • 09/15/04
31
Disassembly & Re-Assembly
In addition to easily folding and unfolding, the AutoGo 550 can be quickly and easily disassembled for storage or transport,
then re-assembled when needed. Instructions to take your AutoGo 550 apart and put it back together are presented in
this section.
Taking the AutoGo 550 Apart
Taking the AutoGo 550 apart involves removing the seat
and Battery Pack, flattening the seat frame, and removing
the drivetrain. Instructions to disassemble the AutoGo 550
appear in the following.
1.
Turn power “OFF.” Fold seat back down.
2.
Pull seat latch bar on rear underside of seat. Lift rear of
seat, and slide seat forward to disengage from the frame
(see Illustration 12).
Illustration 12 — Seat Removal
19285600/12
19285600 Rev.03.OM
9/15/04, 5:37 PM
31