CV Mode
Midinome has a small built in switch that will toggle the device
between
Audio Click Mode
, and
CV Clock Mode
. The
Audio
Click Mode
is intended to be a metronome, and
CV Clock Mode
is
intended to trigger a synthesiser or drum machine, or to
synchronize other electronic devices which accept this standard. To
toggle between modes, first power off the MIDINOME and remove
all cables, turn the MIDINOME on it’s back and remove the 4
screws. The switch is located in the middle of the board, and can
be toggled by hand.
Settings Menu
To enter the settings menu, unplug the power to the Midinome,
press & hold both the
Start/Stop & Tap Tempo
buttons and plug in
DC power again.
Midinome will flash purple, indicating you are in the programmable
Menu.
There are 3 options you can change (in order)
CV Divider - Purple LED
Click Tone - Yellow LED
Default Tempo - Blue LED
10
