background image

 

 

 

14

 

 

This machine is not to be used by people burning without tanning when exposed to the sun, 

by people suffering from sunburn, by people suffering from or previously suffering from skin 

cancer or predisposed to skin cancer. 

 

Read this carefully: if unexpected side effects, such as itching, occur within 48 hours of the 

first    session of using a UV appliance, medical advice should be sought prior to further UV 

exposure. 

 

This appliance is not to be used by people burning without tanning when exposed to the sun, 

by people suffering from sunburn, by people under the age of 18, or by people suffering from 

(or previously suffering from) skin cancer or predisposed to skin cancer. 

 

Do not undergo exposure when taking medicines or using cosmetics, which increase 

sensitivity to ultraviolet radiation. If in doubt, take medical advice.  

 

This appliance shall not be used by persons under medical care for diseases that involve 

photosensitivity or persons receiving photosensitizing medications. 

 

Seek medical advice if persistent lumps, sores or pigmented moles develop on the skin. 

 

Ultraviolet radiation from the sun or UV-machines can cause injury to skin or eyes. These 

biological effects depend upon the quality and the quantity of the radiation as well as the skin 

sensitivity of the individual. 

 

The unprotected eye may develop surface inflammation, and in some cases, damage may 

occur to the retina after excessive exposure. Cataracts may develop after many repeated 

exposures. 

 

Read this carefully: if unexpected side effects, such as itching, occur within 48 hours of the 

first    session of using a UV appliance, medical advice should be sought prior to further UV 

exposure. 

 

The skin may develop sunburn after an excessive exposure. Excessively repeated exposure to 

ultraviolet radiation from the sun or the machine may lead to premature ageing of the skin as 

well as increased risk of development of skin tumours. 

 

Remove cosmetics well in advance of exposure and do not apply any sunscreens. 

 

According to basic standards your Ultrasun tanning equipment needs to be equipped with 

original parts and lamps. In every other case the guarantee is taken off as well as any 

responsibility and any liability.   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for TSU EDITION Q10 MAGNUM POWER

























Reviews:

Related manuals for TSU EDITION Q10 MAGNUM POWER