This sunbed is, once delivered, partially pre-build (Fig. A). For completion of the assembly of the
sunbed, the shouldertanner (Fig. F:ST) and the front cover of the bed (Fig. H:11 with 10) need to be
assembled. Also the two pipes, which connect the top with the bed, needs to be fixed with the two
provided Allen bolts (Fig. E:S).
For easier transportation to its final location, the top part and the ballast trays can be disassembled
in the following way:
Note: Always disconnect the power supply before disassembling and during
assembling
Take all loose parts out of the packaging. Remove the 7 screws (Fig. A:1) and pull the metal covering
plate (Fig. A:2) slightly forward on its handles so the space with the technical parts becomes visible
(Fig. B).
Fig.A
Fig.B
(Dis)assembly Of The Q10
