3
www.ultratecfx.com
10” Automatic Round Damper
CLF-2985
10" Automatic Round Damper (ARD) 110V
CLF-2986
10" Automatic Round Damper (ARD) 220V
The 10” Automatic Round Damper (ARD) is an inline damper that will open or close
to allow or prevent fog from flowing down a run of 10” ducting.
See ARD Manual
for complete operating instructions.
10" Automatic Round Damper
CLF-9040 10" Fog Curtain Coupler
Are these the plastic clamshell type??
CLF-9039 10" Rigid Pipe (10' Length)
The 10" Rigid Pipe is ideal for long runs or permanent installations as it creates less
internal turbulence than the flexible 10” hose. It can be easily cut to length for
installation with a reciprocating saw.
10" Rigid Pipe (10' Length)
CLF9045 Fog Curtain Metal Bracket
The Fog Curtain Metal Bracket acts as a coupler to join 2 10" rigid pieces together,
and as a point to hang the fog curtain from (additional field supplied hardware is
necessary).
For a more rigid connection a CLF9032 4 1/2" Sleeve can be used in conjunction to
stiffen the joint.
A CXP4088 – Fog Curtain Foam Gasket may be required if fog leakage at the joint
happens (sold Separately)
CLF9050 Fog Curtain End Plate Plastic
The Fog Curtain End Plate Plastic is used to terminate the run on any 10" rigid piece.
A CXP4088 – Fog Curtain Foam Gasket is included to minimize leakage at the
connection.
CXP4088 – Fog Curtain Foam Gasket
Fog Curtain Foam Gasket may be required if fog leakage at the joint happens.
Fog Curtain Metal Bracket
Fog Curtain End Plate Plastic
Fog Curtain Foam Gasket
