background image

   Warning!!

WARNING!!

1. Do not touch, place hands or expose skin within 20”(50cm) of the discharge nozzle.
2. Do not remove the outer case.
3. Persons suffering from asthma or allergenic sensitivity may experience irritation, discomfort or 
    allergic symptoms when exposed to fog effects.
4. Ensure that this unit is grounded at all times. Failure to do so may result in serious injury.
5. Use Ultratec Special Effects Luminous 7 Water Base Haze Fluid 

ONLY

.  A Luminous 7 SDS is 

    available at www.ultratecfx.com

Ultratec Special Effects Radiance Haze Machine is a major advancement in Water Based Haze Technology. 
Once again, Ultratec Special Effects is setting new standards that all other haze machines will be measured 
against. 

Features include:  

Digital DMX address display. 

 

 

 

Built-In DMX that controls both the Haze Output and the Internal Fan. 

This combination offers excellent haze control and even dispersion. The Radiance can also be operated by an 
optional remote or by utilizing the Onboard Variable Settings. Additional features include an IEC removable 
power cable and multi-use bracket. 

The Radiance uses only Ultratec Special Effects Luminous 7 Haze Fluid which is a proven fluid that offers the 
best in low consumption with superior visual hang time. It can accommodate both the 2L or 4L sizes of the 
Ultratec fluid containers.

1. Ensure that any operation of the machine is supervised by suitably trained and authorized 
   personnel.
2. Do not modify the machine or use a machine which has been damaged in any way.
3. Allow sufficient air circulation around the machine at all times.
4. Protect the machine from direct weather effects and wet locations. Suitable for dry locations 
    only.
5. Only use Luminous 7 Water Base Haze Fluid by Ultratec Special Effects.
6. Do not continue to produce haze in an enclosed area when visibility is reduced below 
    20”(50cm).
7. Avoid direct haze output continuously at persons, structures or objects within close proximity of 
    the discharge nozzle.
8. Ensure that adequate exhausting arrangements are available in the event of an emergency.
9. Do not place hands or exposed skin within the first 20”(50cm) of the discharge nozzle at any 
    time during haze production.
10. Haze effects can trigger smoke alarms and detectors. Please take suitable precautions to 
      prevent false alarms.

Important Safety Instructions:

WARNING!!

Safety Precautions

WARNING!!

Introduction

1

www.ultratecfx.com

Summary of Contents for Radiance Hazer











Reviews: