620 Series IPPhone
www.ultrative.com/
Ultrative Communication Co.,Ltd
Appendix
：
Auto Provision
Pre-configuration on TFTP/HTTP/HTTPS/FTP Server
When the software or kernel auto-provision is enabled and want to run, IP Phone will
check the software and kernel version at first, so we need make some
pre-configuration on the provisioning server.
Auto Provision for Software:
1.
Create a notepad file named“
F000X00.cfg
”(the “X” is decided by the model of
the IP phone you are using, for example, if the model is UTT-620, the file name
is “F000600.cfg”);
*Named rule of the file:
F00600.cfg: for UTT-620, UTT-610 and UTT-620;
F00400.cfg: for UTT-410 and DS412;
F00300.cfg: for UTT-310 and DS312;
F00200.cfg: for UTT-210 and DS212.
2.
Open the notepad file “F000X00.cfg” and write the new software name in it, for
example,
S_UTT-620_version2.0.4.6: for UTT-620, UTT-610 and DS622;
S_UTT-410_version2.0.4.6: for UTT-410 and DS412;
S_UTT-310_version2.0.4.6: for UTT-310 and DS312;
S_UTT-210_version2.0.4.6: for UTT-210 and DS212
Write down the new version you want to upgrade and save it on your
provisioning server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your software would be not available.
3.
After it, upload the new software to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
Auto Provision for Kernel:
1.
Create a notepad file named“
K000X00.cfg
”(the “X” is decided by the model of
the IP phone you are using, for example, if the model is UTT-620, the file name
is “K000600.cfg”);
*Named rule of the file:
K00600.cfg: for UTT-620, UTT-610 and DS622;
K00400.cfg: for UTT-410 and DS412;
K00300.cfg: for UTT-310 and DS312;
K00200.cfg: for UTT-210 and DS212.
2.
Open the notepad file “K000X00.cfg” and write the new kernel name in it, for
example,
K_uImage_600.bin_version2.1.6: for UTT-620, UTT-610 and DS622;
K_uImage_400.bin_version2.1.6: for UTT-410 and DS412;
