Shenzhen Ultrative Technology Co., Ltd.
T: +86-755-29685231
E: sales@ultrative.com
http://www.ultrative.cn | com
Add: 012#, 5/F, Block A, Hedong Bldg., Liutang Rd., Xixiang St., Bao An District, Shenzhen, China
57
/
97
Multiple accounts using the function of dial peer
9T When configuring the SIP1 server, and register
，
through the sip 1 number beginning
with 9 can achieve the function of del. Example : when dial 98765,it will dial 9876
through the sip1
8T When configuring the SIP2 server, and register
，
through the sip2 number beginning with
9 can achieve the function of del. Example : when dial 87654,it will dial 8765 through the
sip2
7T When configuring the SIP3 server, and register
，
through the sip 3 number beginning
with 9 can achieve the function of del. Example : when dial 76543,it will dial 7654
Field Name
Explanation
Phone number
There are two types of matching: Full Matching or Prefix Matching.
In Full matching, the entire phone number is entered and then
mapped per the Dial Peer rules.
In prefix matching, only part of the number is entered followed by
T. The mapping with then take place whenever these digits are
dialed. Prefix mode supports a maximum of 30 digits.
Destination
Set Destination address. This is optional. For a peer to peer call,
enter the destination IP address or domain name. To use a dial rule
on the SIP2 line, enter 0.0.0.2. For SIP3 enter 0.0.0.3
Port
Set the Signaling port, the default is 5060.
Alias
Set the Alias. This is the text to be added, replaced, or deleted. It is
optional.
Note:
There are four types of aliases.
1) Add: xxx – xxx will be dialed before any phone number.
2) All: xxx – xxx will replace the phone number.
3) Del: The characters will be deleted from the phone number.
4) Rep: xxx – xxx will be substituted for the specified characters.
Call Mode
Select either SIP or IAX2 protocol.
Suffix
Characters to be added at the end of the phone number. This is
optional.
Delete Length
Sets the number of characters to be deleted. For example, if this is
set to 3, the phone will delete the first 3 digits of the phone number.
This is optional.
