background image

 

 

 

19-2021 Rev E, 06/05/07 

16 

 

EQUIPMENT WARRANTY

 

 

UltraViolet Devices, Inc. (UVDI)

, warrants to original Buyer for one year 

from the date of 

original installation, or eighteen (18) months from date of shipment, whichever comes first, that its 
goods are free from defect in material and workmanship under normal use and service.  

UVDI

’s 

obligation under this warranty shall be limited to the repair or replacement of those goods which 
prove defective, provided that such products are installed, maintained, and operated for the 
purpose and in the manner intended and for which 

UVDI

 instructs or recommends.  Neither 

UVDI

 

nor its dealers shall be liable for any special or consequential damages directly or indirectly 
arising from the design, construction, installation, servicing, or operation of the goods.  THIS IS 

UVDI

’S SOLE WARRANTY.  NEITHER 

UVDI

 NOR ITS DEALERS MAKE ANY OTHER 

WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED.  ALL IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED 

UVDI

’S 

AFFORESTATED OBLIGATIONS ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS 
WARRANTY. 
 

UVDI

 AND ITS DEALERS’ LIABILITY UNDER THIS WARRANTY SHALL IN NO EVENT 

EXCEED THE COST OF THE GOODS SOLD UNDER THIS CONTRACT OF SALE.  

UVDI

 

neither assumes, nor authorizes any person to assume for it, any obligation in connection with the 
goods.  This warranty shall not apply to any goods (a) which have been subjected to misuse, 
tampering, negligence, or accidents; or (b) the serial numbers of which have been altered, 
defaced, or removed; or (c) which have been used in a manner contrary to 

UVDI

’s instructions or 

recommendations.  Buyer shall not return to 

UVDI

 any allegedly defective

 goods without 

UVDI

’s 

prior written authorization. This warranty may not be assigned or transferred.  
  

Product Registration 

It is highly recommended that you register you product via the web at 

http://www.altruv.com/

 or 

return the enclosed self-addressed postcard to UVDI.  Product registration will insure that your 
warranty is handled in a proper and expeditious manner.  In addition, it will allow UVDI to provide 
you with important updates regarding your new product including reminders of when replacement 
parts are needed and also make you eligible for future parts discounts. 
 
 
 

 

 

Manufactured by: 

 

26145 Technology Drive 

Valencia, CA 91355 

(877) PUREUVC 

(661) 257-4698 fax 

www.uvdi.com

 & www.altruv.com

 

 

Specifications subject to change without notice. 

©Altru-V and V-Flex are brands owned by UVDI. 

Copyright © 2003 by UltraViolet Devices, Inc.  All rights reserved.

 

Summary of Contents for High Output UV Device V-Flex

















Reviews: