3
Safety instructions & general use
Electrical
Connect to a 220-240 VAC fully earthed supply via a 3pin plug.
It can be dangerous to operate an ultrasonic bath without an earth
connected.
The mains plug is fitted with a 5A fuse.
NEVER FIT A FUSE OF A HIGHER
RATING.
Ensure that excess mains cable is stored neatly.
General use
Ensure that the bath contains liquid before you switch it on.
Always use a basket to support items to be cleaned.
Not doing so may damage the bath and invalidate your warranty.
Do not place hands or fingers in the bath.
Care should be taken when operating the bath at higher temperatures as
external surfaces may become hot.
Never use toxic, flammable, acidic, caustic or corrosive solutions in the
bath.
Do not move the bath when it contains water.
Before cleaning, drain the bath. Clean by wiping with a clean non-abrasive
cloth.
The user should familiarise themselves with this
Operator Instruction
manual before operating the equipment and should apply to Ultrawave or
its agent for advice on cleaning techniques or detergents. Ultrawave will
not be responsible for damage or injury caused by incorrect use of the
equipment.
WEEE Compliance
Ultrawave are complying with the WEEE regulations by contracting-our
obligations to a Producer Compliance scheme. Once it is deemed that this
Q-Series
model is no longer effective, please contact Ultrawave to arrange
collection by our compliance scheme provider, who will pick up the
machine from your premises.
