Qi-Series Operating Manual
12
C6027205
Screen 2: Setting the cycle time
Your Qi-Series ultrasonic bath is factory pre-set with a cycle time of 15
minutes. Use this screen to amend the cycle time.
Use the UP and DOWN keys to scroll through the numbers to increase or
decrease the time of up to 99 minutes.
To run the ultrasonic bath continuously, use the UP and DOWN keys to set
the cycle time to 0.
When the desired cycle time has been selected, use the MENU key to move
to the next screen.
Screen 3: Setting the power level
Your Qi-Series ultrasonic bath allows the power level of the ultrasonic
activity to be adjusted. This allows the cleaning cycle to be accurately
tailored to the specific cleaning application.
Use the UP and DOWN keys to scroll through the numbers between 50 and
100%.
When the desired power level has been selected, use the MENU key to move
to the next screen.
