Qi-Series Operating Manual
6
C6027205
KEY 4
Controls
Ensure your Qi-Series ultrasonic bath is plugged into a
230 VAC fully earthed supply.
Once plugged in, switch on your Qi-Series bath via the
power on/off switch at the rear of the unit.
The switch will then illuminate.
The Qi-Series is operated through a menu driven control system:
The different keys perform the following functions:
KEY 1:
– Starts and ends the ultrasonic cycle
KEY 2:
Menu – Scroll through the menu
KEY 3:
Up/On – Adjust the settings in the options menu
KEY 4:
Down/Off – Adjust the settings in the options menu
KEY 1
KEY 2
KEY 3