Qi-Series Operating Manual
8
C6027205
Operator instructions
When the Qi-Series power is turned on and the bath is full of liquid, the
following screens will display alternately.
When the water temperature is at or above the temperature set, the
message “Temp OK” will display.
The actual temperature in the bath will vary and may be different to the
value shown in the screen above.
To immediately start the cycle using the already set cleaning parameters,
press the
key.
Your Qi-Series remembers the set parameters from the previous cycle. If the
operator wants to run the same cleaning cycle, it is therefore not necessary
to run through the menu each time.
