background image

 

U-Series Operating Manual 

15 

C6000610 

Maintenance 

It  is  important  to  keep  your  bath  clean.  Not  only  will  contaminated  liquid 
reduce  the  performance  of  the  bath,  it  may  also  damage  it.  Change  the 
cleaning liquid regularly. Your cleaning process will determine how often to 
change the liquid 

 the more soiled your items, the more often you will need 

to change the liquid. Change the cleaning liquid at least daily. 
The base of the bath generates the ultrasonic activity by vibrating at very 
high speeds. If any contaminants are in contact with the bath, they act as 
an abrasive, causing wear on the metal surface. In extreme cases, the bath 
will develop holes and start to leak.  
Portable Appliance Testing (PAT) should be conducted with water in the bath. 
There are no user serviceable parts inside the bath. All service and repair 
must be conducted by suitably trained and qualified engineers approved by 
Ultrawave.  

Troubleshooting 

Ultrawave  has  a  dedicated  After  Sales  team  who  are  able  to  resolve  any 
problems  that  occur  with  your  bath.  However,  on  many  occasions  it  is 
possible that the problem can be rectified by the operator. 
 

The unit fails to turn on and 

no lights illuminate 

Check  that  the  unit  is  plugged  in  and  that  mains 

electricity is present. Check the mains plug fuse. 

The unit does not sonicate. 

Check  that  the  indicators  illuminate  when  the  unit  is 

switched on. 
If  the  indicators  fail  to  illuminate,  check  the  mains 

supply and fuse in the mains plug. 
If  the  indicators  illuminate  but  the  bath  does  not 
sonicate, please contact our After Sales team. 

The  unit  sonicates  but does 

not clean effectively 

Have you added the correct amount of cleaning fluid? 
Have you overloaded the basket? 

The  unit  sonicates  but does 

not heat. 

Does your unit have heaters? 

 

there will be an “H” in 

the description line on the rating plate. 
Check  that  the  heater  indicator  illuminates  when  the 

unit is switched on. 
Is the heater dial turned to the desired temperature? 
If the heater indicator illuminates but the bath does not 

heat, please contact our After Sales team. 

Summary of Contents for U Series





















Reviews: