Ultre5400 - User Manual
3-9
Control Panel - 3
■
Density Value Display
The Density Value Display provides the current density value in percentage. It
is called up by depressing the Density Button while the LCD is showing the
Machine Status Display. Access is not available from the Menu Selection
Display. The first line contains the word "DENSITY" and the value as a signed
(+ or -) number. The second line shows the value as a bar graph where each
bar represents a 1% increment. See Chapter 5, "Changing Default Settings", for
changing the Density setting.
■
Menu Selection Display
The Menu Selection Display provides access to all of the submenus and
functions, with the exception of density, to permit reprogramming of the
machine's default settings. It can be called up on the LCD by depressing the
Menu Button while the LCD is showing the Machine Status Display. See
Chapter 5, "Changing Default Settings", for making changes to the default
settings.
■
LED
The green LED will light up when power is turned on. It will also blink
continuously as the film is advancing through the machine.