Ultre 5400 - User Manual
4-17
Loading - 4
6. Operate the knife by depressing the Cut Button. The electric knife will cut the
film and the LCD will display "CUT" for about one second. The Primary
Drive Roller will advance the film through the upper rollers and out of the exit
guides. At the same time, the LCD will display "FILM ADVANCE" and the
LED will begin blinking.
After the film advance is completed, the LCD will display "NO CASSETTE"
and the LED will stop blinking. Remove the cut film from the exit guides and
discard.
7. Replace the Take-up Cassette on the machine by aligning the slot in the cas-
sette with the exit guides. Note the raised mark on the front side of the Take-up
Cassette to identify the slot side. Place the Take-up Cassette on the foam cov-
ered mounting surface. The machine is now ready to receive data from the host
system.
For best results and to ensure repeatability after a media cut , perform one eight
inch film advance into the Take-up Cassette prior to imaging color separations.
This can be done automatically by programming the Auto Advance feature in
the Control Panel user menu.
The LCD will display "NO CASSETTE" if the Take-up Cassette has been
removed or improperly installed on the machine.
