DC Power Supply
【
DC-10-D/DC-20-D/DC-10-DH/DC-20-DH
】
4. Description of Functions
-18-
4-2 Rising Operation
When the breaker is turned on, the monitor starts up after several tens of seconds and the top screen
appears.
Before the top screen appears, the power supply is in the process of starting up, so no operations are
accepted.
For details, see [5-1 How to Operate in LOCAL Mode].
Top screen display
4-3 DIRECT JUMP Function
For the menus, you can move directly to the desired one using the DIRECT JUMP function.
Pressing the FUNC +
◀
buttons moves to the DIRECT JUMP screen.
Enter the desired menu number, move [
▶
] to JUMP, and press the ENT button to jump to the desired
menu.
The number displayed at the upper right of each menu screen is the menu number.
4-4 Description of Each Operation Mode
This product works in the following operation modes.
The operation modes are switched by issuing commands through the front panel or the SERIAL
communication port.
The settings on the front panel are as follows.
The operation mode appears at the upper right of the top screen.
When the ENT button on the front screen is pressed in the presence of the cursor, the operation mode
blinks. Select an operation mode using the up and down buttons and press the ENT button to confirm.
This can also be set in the A23 menu.
Press the
FUNC +
◀
buttons
.
Enter the menu
number.
Press the ENT
button.
Summary of Contents for DC-10-D
Page 87: ......
