background image

SK00-4390-DI-002-11

 

0. Before Using This Product 

We thank you very much for purchasing our product. 
You  are  kindly  requested,  upon  delivery  of  the  product,  to  check  that  the  delivered  product  is 
exactly what you have ordered and it has no damage caused by transport or the like. 
This manual gives description on operation and maintenance procedure appropriate to use the 
product in safe and effective way. Please read this manual beforehand to correctly use the Pump. 
You are requested to install and operate the product in compliance with the laws and regulations 
relating to the safety, e.g. Fire Defense Law, Electric wiring regulation and so on in the country 
and region you use the product. Consequently you shall be requested to attend general safety 
lectures officially effective in the area, such as electrical safety, Cargo handling safety and so on. 
Note that any person not attended such lectures shall be restricted from handling the product. 
Operators shall need to attend such kind of training and have special knowledge, skill and title 
regarding the electricity, machinery, cargo, vacuum and so on. 
This product is designed to conform to regulations valid at the time of issue of this manual and its 
conformity is not ensured if any of regulations shall be changed in the future. 
The performance and safety of the product might not be ensured if any of the devices put together 
did not conform to same regulations or the product itself was modified. ULVAC shall be not liable 
to guarantee performance and safety in such cases above. Any modification of the product by the 
user is out of the scope of guarantee by us and not be guaranteed in any manner. 
Be  sure  to  clear  any  energy  sources,  e.g.  electricity,  coolant  and  so  on  of  the  product  before 
installing or removing the product. 
Please note that any of the parts used in this product shall keep the performance at the time of 
the  shipment  but  shall  not  survive  eternally.  Any  of  the  parts  cannot,  under  any  application 
supposed under socially-accepted idea, help but inevitably deteriorate its performance and get 
easily result in causing trouble of the product. You are kindly requested consequently to take your 
application situation into consideration and help yourself to implement the protective maintenance 
so as to avoid troubles.   
Through implementation of the protective maintenance, you shall reduce occurrence of the trouble 
due to wear and/or failure of the part and bring reducing the occurrence of the downtime caused 
by the product trouble and fire as well as a risk of affecting the another process.   
We would like to ask you again to establish the protective maintenance plan as well as conduct 
the part replacement and overhaul in accordance with such a plan.

 

Please do not hesitate to contact our sales office or agency closest to you or the Components 
Division if you had any question or unclear on the use. 

 

 

 

Summary of Contents for VS1501














































































Reviews: