10
0
8.9.9.
Install
pressing pin
body and
pressing pin body spring.
Note
Tapered face of pressing pin
body shall contact bearing.
8.9.10.
Apply adhesive to thread on 2/3 of
length, then install pressing pin body
guard and bolts onto crankshaft
case. Tighten the bolts to specified
value.
Tightening torque: 10N.m
8.9.11.
Install chain, tension plate, chain
guard plate, in this order, then tighten
bolts.
CBF 125 AIR COOLING ENGINE SERVICE MANUAL
RENEGADE SPORT & SCRAMBLER X 125 EFI