Battery discharge/ weak
Battery not fully charged
Loose connection
Malfunctioning of starter switch
Starter relay not working
Starter Motor defective
Ensure the Battery voltage is more than 12.4 volt
During cranking it should not be below 6 volt
Ensure the all the connectors are firmly connected with wiring
Check & replace
Check & replace
Check starter motor for any obstruction
• POSSIBLE CAUSES
• ACTIONS TO BE TAKEN
8. Starter motor struggles to crank
• POSSIBLE CAUSES
• ACTIONS TO BE TAKEN
• POSSIBLE CAUSES
• ACTIONS TO BE TAKEN
9. Horn not working Horn sound not proper
Ignition Key is OFF
Battery discharge
Loose connection
Fuse Blown
Incorrect screw adjustment
Keep Ignition Key in ON condition
It should be more than 12.4 volt, Charge if required
Ensure all the connectors are connected with wiring
Replace if found blown
Set the horn by adjusting screw
10. No Fuel Indication/ Improper fuel
Ignition Key is OFF
Loose Connection
Fuel sensor defective
Battery discharge
Keep Ignition Key in ON condition
It should be more than 12.4 volt, charge if required
Ensure the all the connectors are connected with the wiring
Check the resistance of Fuel level sensor, replaced if found faulty
60
USER’S MANUAL
UM MOTORCYCLES CHILL EURO V 50 - 125
Summary of Contents for CHILL EURO V 125
