INTRODUCTION
USER MANUAL — 74-36103-ENG R6
17
WARNING
• Grounding reliability can be achieved only when the bed is connected to a supply mains with protective
ground or to a hospital grade outlet that is protectively grounded.
• To avoid risk of electric shock hazard, bed must only be connected to a supply mains with protective
ground or to a hospital grade outlet that is protectively grounded.
• This bed is designed and intended for usage with a maximum total load of 500 lb/227 kg, including patient,
mattress and accessories. If not avoided, bed functionalities may not work properly and permanent
damages to bed may occur.
• This bed is not designed nor intended to be used with infants. If not avoided, situation could become
hazardous and prevention of patient fall or patient entrapment cannot be ensured.
• The bed exit detection system must be used with patients with minimum weight of 50 lb/22.6 kg. If not
avoided, the bed exit detection system may not detect all movements and the functionality could be affected.
• Always ensure that bed is clear of interference with other equipment, parts of patient’s body or other
person prior to any operation of the bed. If not avoided, moderated to severe injuries and/or permanent
damages to bed or environment could occur.
• Always ensure proper clearance under the bed prior to use hoists, or other equipment, that slide under the
bed. If not avoided, moderated to severe injuries and/or permanent damages to bed or environment could
occur.
• Severe patient injuries could result of an improper usage of restraint straps. Healthcare professionals shall
ensure proper restraint straps usage, location and adjustment.
• Severe patient injuries could result of bed operation if patient restraint straps are in usage. Do not operate
bed if patient restraint straps are in usage.
• If siderails are used by patient as a grip handle, they shall be used with caution. Abusive usage could
result in bed tipping over and could result in moderate to severe injuries and damages to product and/or
environment.
• Siderails are not designed nor intended for patient restraint. If not avoided, situation could result in patient
injury.
• Do not use siderails to move the bed. If not avoided, situation could result in mechanical damages, which
could lead to patient fall. Use headboard or footboard to move the bed.
• CPR release option usage shall be restricted to emergencies. To avoid injuries or product damages, ensure
total clearance around product prior to usage.
• To reduce risk of fall and injury when patient is unattended, keep patient sleep surface to the lowest
position and siderails raised.
•
Always ensure the mattress used on bed complies with specifications of recommended mattresses. If not,
situation could become hazardous for patient fall or patient entrapment.
•
Verification and maintenance of bed shall be performed by qualified and trained personnel. Electrical or
electronic misconnection could result in shock or fire hazards.
!
Summary of Contents for ook cocoon
