OPERATING INSTRUCTIONS
26
USER MANUAL — 74-36103-ENG R6
Motion interrupt (optional)
The bed can be equipped with a motion interrupt system that detects an obstruction under the bed when the bed
elevation system is being lowered. The system will then interrupt the bed motion. If bed is equipped with a display
screen on footboard using software version 2.0, a message will appear in the display screen to indicate that an
obstruction has been detected. If bed is equipped of bumpers with sideview lights and also using software version
2.0, the sideview lights will be flashing orange when an obstruction is detected while bed is being lowered.
Patient restraint location (optional)
Locations are available for patient restraint
straps. Four are located under the mattress
surface, two at head end of bed (A) and two at
foot end of bed (B). The six mattress retainers
can also accomodate for the restraint straps. Two
are located on each side of the seat section (C),
two on each side of the backrest section (D) and
two on each side at food end of the bed (E). Refer
to illustration on the right for localization.
WARNING
• Severe patient injuries could result of
an improper usage of restraint straps.
Healthcare professionals shall ensure
proper restraint straps usage, location and
adjustment.
Bumpers (optional)
Four bumpers are optional at each corner of the bed to help preserve the wall. Each corner offers a 3/4” socket
to support IV poles.
Head bumpers (optional)
Two optional bumpers are situated at head end of the bed for additional protection of the walls.
C
A
B
D
E
!
Summary of Contents for ook cocoon
