OPERATING INSTRUCTIONS
40
USER MANUAL — 74-36103-ENG R6
Home screen
Screen informs the user of the height and the angulations of patient sleep surface. User can return to the Home
screen menu at any time by pressing on the Home pictogram.
IMPORTANT
The bed height is rounded up.
The angulations accuracy of backrest section is +/- 2
o
.
The angulations accuracy of Trendelenburg and reverse-Trendelenburg is +/- 2
o
.
A simplified interface displaying less options is offered for a simplified use. It is possible to change the interface
through the Preference menu, then through the Maintenance menu in Bed options menu. On the Standard interface,
the Auto Arm button and the Inform button are not displayed. If PIN protected, contact maintenance for access.
Select:
• Arm (Disarm)
to arm or disarm the bed exit
control system. The pictogram on the button
informs of the pre-selected detection level.
Press the ARM button to arm the Bed exit
control system.
Screen will return to the Home
screen button and button header will change
to disarm. Menu display, if patient is in bed or
Auto arm is set; it will turn green to indicate
the bed exit control is activated. If the patient
is not in bed or Auto mode is not set, the menu
display will turn flashing orange, in alarm.
If the bed exit control is triggered, the pre-
set tone and volume will activate. Press the
button associated with Disarm to deactivate
the alarm or bed exit control. Refer to the
Fall risk management screen
menu section
(page 41) for Auto setting, selection of levels
of detection, and setting of volume and tone.
IMPORTANT
Screen illustrating Arm button displays the Motion detection level.
• Auto Arm
to arm automatically the bed exit detection when patient ingresses in bed. If user selected the
standard interface, the Auto Arm button is not displayed on the home screen.
•
Fall Risk Management
to access selection for levels of detection for bed exit control, set volume and tone,
view log, auto arm bed exit system, or Inform menus.
• Preference
to set date, time, language, nightlight brightness (optional), sideview lights brightness (optional),
screen brightness or, access the maintenance.
Preference
Fall risk
management
0
º
30’’
0 º
November 1st 12:00
Medsurg
Arm Detection 2
Auto
Arm
Preference
Fall risk
management
0
º
30’’
0 º
November 1st 12:00
Medsurg
Arm Detection 2
Auto
Arm
Summary of Contents for ook cocoon
