OPERATING INSTRUCTIONS
30
USER MANUAL — 200-9011-ENG R1
HEAD AND FOOT ENDS SIDERAILS
WARNING
• Siderails are designed to prevent patient of inadvertently fall from the bed.
• Siderails are not designed nor intended for patient restraint. If not avoided, situation could result in patient
injury.
• If siderails are used by patient as a grip handle, they shall be used with caution. Abusive usage could
result in bed tipping over and could result in moderate to severe injuries and damages to product and/or
environment
• Do not use siderails to move the bed. If not avoided, situation could result in mechanical damages, which
could lead to patient fall. Use headboard or footboard to move the bed.
Backrest section angle degree indicator
An integrated angle degree indicator is located on the external side of the head siderail and can be used as a
reference for patient positioning. Reading from -15
o
to 75
o
.
Positioning siderail
Bed is equipped with 2 head siderails and of 2 foot siderails. Each siderail operates with a release handle located
at the bottom center.
Raise a foot or head end siderail:
1. Grasp the upper center of the rail and pull up until it latches into the locked position: a click will be heard.
2. Verify that the siderail release handle displays a green window for a locked status.
3. Ensure that siderails are properly locked; lightly push down the rail at head end to verify it is correctly latched,
and perform a head to feet movement with the rail at foot end to verify it is correctly latched.
Lower a foot or head end siderail:
1. Grasp the upper center of the rail; with second hand, pull the handle up and rotate downward.
2. Siderail will be below the mattress surface. The handle will display a green window for an unlocked but safe
status.
WARNING
• If the handle window display is red, the siderail has not reached a patient safe position. Ensure that siderail
has completed its motion up or down for the display window to turn green.
!
!
Summary of Contents for ook "snow" all 200-0000
