OPERATING INSTRUCTIONS
USER MANUAL — 200-9011-ENG R1
37
Home screen with integrated scale
Screen informs the user of the height and the angulations of patient sleep surface. User can return to the Home
screen menu at any time by pressing on the Home pictogram.
IMPORTANT
The bed height is rounded up.
The angulations accuracy of backrest section is +/- 2
o
.
The angulations accuracy of Trendelenburg and reverse-Trendelenburg is +/- 2
o
.
A simplified interface displaying less options is offered for a simplified use. It is possible to change the interface
through the Preference menu in the Maintenance menu. On the Standard interface, the Auto Arm button and the
Inform button are not displayed. If PIN protected, contact maintenance for access.
A password can be requested when screen is activated after sleep mode.
Select:
• Arm (Disarm)
to arm or disarm the bed exit
control system. The pictogram on the button
informs of the pre-selected detection level.
Press the ARM button to arm the Bed exit
control system.
Screen will return to the Home
screen button and button header will change
to disarm. Menu display, if patient is in bed or
Auto arm is set; it will turn green to indicate
the bed exit control is activated. If the patient
is not in bed or Auto mode is not set, the menu
display will turn flashing orange, in alarm. If bed
is equipped of bumpers with side view lights,
they will turn ON, solid green or will be flashing
orange. If the bed exit control is triggered,
the pre-set tone and volume will activate.
Press the button associated with Disarm to
deactivate the alarm or bed exit control. Refer
to the
Patient risk management screen
menu
section (page 40) for Auto setting, selection
of levels of detection, and setting of volume
and tone.
• Auto Arm
to arm automatically the bed exit
detection when patient ingresses in bed. If user
selected the standard interface, the Auto Arm
button is not displayed on the home screen.
•
Patient Risk Management
to access selection of levels of detection for bed exit control, volume and tone
settings, view log, auto arm bed exit system, Inform menus,
or extension risk menu for selection of bed
width configuration and extension width alarm settings.
• Preference
to set date, time, language, nightlight brightness (optional), screen brightness, sideview lights
brightness or, access the maintenance.
• Scale
to access the integrated scale system menu.
Home
November 1st 12:00
Arm
Detection
Detection 2
Scale
Pref.
Patient
Risk Mgmt
0
º
30’’
0 º
AUTO
Width : 42’’
Home
November 1st 12:00
Disarm
Detection
Detection 2
Scale
Pref.
Patient
Risk Mgmt
0
º
30’’
0 º
Inform
AUTO
Width : 42’’
Summary of Contents for ook "snow" all 200-0000
