ACCESSORIES
USER MANUAL — 200-9011-ENG R1
67
Removable patient control 2 functions - 299-0150
The two functions patient control
is intended to allow patient or healthcare professionnals to adjust the backrest
section and foot section of the bed. Pictograms inform the user of positioning possibilities and features. Do not
use sharp or small pointed objects on membranes to avoid permanent damages.
ATTENTION
• Patient monitoring and patient authorized bed functionalities are the responsibility of the facility.
IMPORTANT
Refer to the
pictograms and definitions
section (page 11) to support identification.
The control lock from the footboard control will lock the functions of the patient control.
To plug/unplug patient control:
1. Plug or unplug patient control in proper outlet situated under seat section on the
left side of the bed.
2.
Use the clip attached to the cable to fix the cable on the central mattress retainer.
Then, hook the patient control on the siderail or fix it to the bed sheets with the
attached clip to store.
To activate patient control:
1. Press and hold button.
2. Release button when the required position is reached.
3. Store and clip patient control on siderail or on bed sheets.
QDF36-2152
QDF200-3815
!
Summary of Contents for ook "snow" all 200-0000
