OPERATING INSTRUCTIONS
46
USER MANUAL — 74-36105-ENG R5
Home screen
Screen informs the user of the height and the angulations of patient sleep surface. User can return to the Home
screen menu at any time by pressing on the Home button.
IMPORTANT
The bed height is rounded up.
The angulations accuracy of backrest section is +/- 2
o
.
The angulations accuracy of Trendelenburg and reverse-Trendelenburg is +/- 2
o
.
A simplified interface displaying less options is offered for a simplified use. It is possible to change the interface
through the Preference menu, then through the Maintenance menu
in Bed options menu. On the Standard interface,
the Auto Arm button and the Inform button are not displayed. If PIN protected, contact maintenance for access.
Select:
• Arm (Disarm)
to arm or disarm the bed
exit control system. The pictogram on the
button informs of the pre-selected detection
level. Press the ARM button to arm the Bed
exit control system. Screen will return to the
Home screen and menu header will change to
disarm. Menu display, if patient is in bed, will
turn green to indicate the bed exit control is
activated. If the patient is not in bed, the menu
display will turn flashing orange, in alarm. If bed
is equipped of bumpers with side view lights,
they will turn ON, solid green or will be flashing
orange. If the bed exit control is triggered,
the pre-set tone and volume will activate.
Press the button associated with Disarm to
deactivate the alarm or bed exit control. Refer
to the
Fall risk management screen menu
section (page 48) for Auto setting, selection
of levels of detection, and, setting of volume
and tone.
IMPORTANT
Screen illustrating Arm button displays the Detection 2 detection level.
• Auto Arm
to arm automatically the bed exit detection when patient ingresses in bed. If user selected the
standard interface, the Auto Arm button is not displayed on the home screen.
•
Fall Risk Mgmt
to access selection for levels of detection for bed exit control,
volume and tone selection
for alarm settings, Inform menus, or view the bed exit log.
• Pref.
to access preferences menus for language, screen brightness, nightlights and sideview lights, date
and time, bed ID settings and, access the maintenance menu. If applicable a short cut to Errors log will be
prompted. If pre-setted, a short cut to Lock of motion and to Inform will be prompted.
Home
November 1st 12:00
Arm
detection
Detection 2
Fall Risk
Mgmt
Pref.
Auto
Arm
0
º
30’’
0 º
AUTO
Home
November 1st 12:00
Arm
Detection
Detection 2
Fall Risk
Mgmt
Pref.
Auto
Arm
0
º
30’’
0 º
AUTO
Summary of Contents for ooksnow FL36
