OPERATING INSTRUCTIONS
USER MANUAL — 74-36105-ENG R5
71
Zero screen
A zero can be performed on the bed through the Zero screen.
Select:
• Start
to perform the zero on the bed. Ensure
the patient is not on the bed before performing
the zero.
• Cancel
to return to the Scale screen.
• Undo Zero
to access and select a previously
performed zero.
Undo Zero screen
The Undo Zero screen offers the caregiver the possibility to return to a previous zero in the event a zero is
mistakenly performed.
The last 4 zeros are recorded with the date on which they were performed and can be
selected.
IMPORTANT
If bed is not equipped with scale system, only the last zero performed is available and can be selected
Select:
• UP/DOWN arrows
to navigate through the
four displayed zeros.
• Apply Zero
to select and apply one of the 4
last zeros to the bed. Answer to the prompt
question message box to confirm. Once the
zero is applied to the bed, the screen will
automatically return to Scale screen.
• Close
to return to Zero screen.
November 1st
12:00
Start
Cancel
Zero
Undo
Zero
Patient shall not be on bed.
Install equipment.
Undo Zero
November 1st
12:00
Close
Apply
Zero
Zero date
Equipment weight
Nov 1st 2016 12:00
25.5 kg
Oct 30th 2016 12:00
13.5 kg (current)
Oct 25th 2016 12:00
130.5 kg
Oct 20th 2016 12:00
10.5 kg
Summary of Contents for ooksnow FL36
