AutoCross-Laser 2 XP / AutoCross-Laser 2 XPG
13
+ –
–
+
LASER
LASER
LASER
LASER
LASER
LASER
The transport restraint must be released for horizontal and vertical
levelling. The laser lines flash and a signal sounds as soon as the device
is outside the automatic levelling range of 3°. Position the device
such that it is within the levelling range. The light of the laser lines is
constant again.
!
2
Horizontal and vertical levelling
Release the transport restraint, set slide switch (3) to „ON“.
The laser cross
and laser points appear. The laser lines and the laser points can be switched
individually with the selection button.
1
Inserting the batteries
Open the battery compartment (2)
and insert the batteries in accordance
with the installation symbols, ensuring
the correct polarity.
GB
Summary of Contents for Laserliner AutoCross-Laser 2 XP
Page 66: ...66...
Page 67: ...AutoCross Laser 2 XP AutoCross Laser 2 XPG 67...