Table of Contents
Index
To control the volume of your external speakers, open the Monitors
& Sound control panel and click Sound to view the sound controls.
Use the Sound Out Level slider to adjust the volume for your
external speakers. If you are playing an audio CD, you may also
need to adjust the volume control in the program you’re using to
play CDs.
If your monitor has built-in speakers, connect the monitor to the
audio out port using stereo miniplugs. You may need to click the
“Monitor Sound” icon at the Monitors & Sound control panel to
display your monitor’s sound controls and select its built-in
speakers.
Connecting and Positioning a Microphone
With appropriate software, you can use a microphone to record your
voice or other sounds. An Apple PlainTalk
®
or compatible microphone
for your SuperMac J700 is available from your UMAX Computer
Reseller.
Using an Apple PlainTalk microphone and software, you will be able
to use speech recognition technology with the SuperMac J700 com-
puter. (You can’t use the round microphone supplied with some Macin-
tosh models.)
To connect and position the microphone,
1.
Plug the microphone’s connector into the Audio In port
on the front of the SuperMac J700 computer as shown.
2.
Place the microphone at the top center of the display,
so that the microphone’s grille is facing you.
If you can’t place the microphone on top of your display, place the
microphone between 1 and 3 feet away from you and directly in
front of you to minimize recording background noise.
3.
Open the Monitors & Sound control panel in the Apple
menu and click the Sound icon.
