Table of Contents
Index
Chapter 1
Unpacking and Setup
1
This chapter explains how to unpack and position your SuperMac J700
computer, and how to connect its various components and peripheral
accessories.
Unpacking Your SuperMac J700 Computer
Choose a sturdy location near a grounded AC power outlet for your
SuperMac J700 computer
before you unpack it
. Be sure to:
■
Plan where to place your other components, like your display, a
printer, speakers, or a modem.
■
Place your display on top of or next to the computer; do not place a
display larger than 17” on top of the SuperMac J700.
Choose a comfortable location that:
■
Provides adequate ventilation so your system does not overheat.
■
Provides room to adjust the position of your display.
■
Is out of direct sunlight.
Since you have reached this manual, you have already opened the outer
box and one of its interior cartons. Remove any other cartons and your
SuperMac J700 computer from the outer box. Open each carton and
remove the keyboard, mouse, cable, software and manual(s). Compare
the items you have with those listed on the included packing list. If
you are missing any items, contact your UMAX Computer Reseller
Save your SuperMac J700 box and its packing materials. Use only the
original packaging for safe shipment or relocation of your equipment.
Setting Up Your SuperMac J700 Computer
The diagram below illustrates the components you need to set up your
SuperMac J700. Carefully read and follow all the setup instructions in
this chapter as you connect your SuperMac J700 and other compo-