Table of Contents
Index
To install a hard disk in bay number 2:
Bay number 2 is below the CD-ROM player. You can install a 5-1/4
inch drive or a 3-1/2 inch drive in bay 2. To install a 3-1/2 inch
drive in bay number 2, you need to use a mounting bracket.
1.
Remove the plastic cover from the front of bay 2.
2.
If you want to install a 3-1/2 inch drive:
■
Unscrew the mounting bracket inside bay 4.
Bay 4 cannot be used because of conflict with the main logic
board.
■
With with the drive connector facing the back of the computer and its PC
board facing down, screw the mounting bracket to the right side of the disk
drive.
Use the screw holes marked HDD.
3.
Slide either a 3-1/2 inch device (with the mounting
bracket attached) or a 5-1/4 inch device into the front
of the drive holder with its connector facing the back
of the computer.
4.
Insert two screws through the side of the drive holder
into the left side of the device (as you face the front).
Use the screw holes marked HDD.