8. Click
the
OK
button to save the Copy push button configuration settings. These settings will be used
whenever you press the Copy button on the front of the scanner.
NOTE:
You can also click the Default button to return the values in each field to the default settings.
Then click
OK
to save these values for the copy button.
Configuring the Custom Button Values
1. Click on the
Custom
icon to open the window that contains the variables you are adjusting.
NOTE:
The Custom icon controls the values fro both the E-mail and FAX and OCR (optical character
recognition) features. You can configure the variables for each function separately.
To configure the values for the e-mail function:
1. If the E-mail icon is not selected (enclosed in a red box), click the
icon.
2. Select the e-mail application (only Netscape and Eudora and Lotus cc:Mail are supported) to send the
scanned image to, by clicking on the arrow to the right of the Mail Destination field.
3. Select the type of image you are scanning by clicking on the arrow to the right of the Document Type
field and choosing one of the available document types from the drop-down menu.
4. Select the desired resolution by clicking on the arrow to the right of the Resolution field and choosing
one of the resolution presents from the drop-down menu.
38
