v
d)
Plug the transparency adapter (multi-pin D-SUB) end of the cable from the
transparency adapter into the transparency adapter connector port on the back
of your scanner.
3. Unlock your Scanner and Transparency Adapter
Before using your scanner ensure that the carriage locks of transparency adapter and
scanner are in the unlock position. Likewise, turn both the carriage locks of
transparency adapter and scanner to the locked position, to avoid damaging the
optics during transportation.
4. Connecting the Interface Card (for PC users only)
a)
Turn off your computer and remove the computer’s housing cover.
b)
Locate an available 16-bit slot.
c)
Insert the SCSI card by pressing it gently but firmly into the slot. Make sure it is
firmly seated in the slot.
d)
Replace the computer’s housing cover.
Carriage Lock for transparency
adapter:
Insert a coin into the
screwhead to either unlock
,
or lock
the transparency
Carriage Lock for Scanner:
Pull and turn this carriage lock
to either lock
,
or unlock
the scanner main body.
