The SCSI cable runs from the motherboard to the CD-ROM player
with four connectors in between. Use a connector closest to the
drive.
8.
Attach a power cable to the drive.
See “Attaching Cables to Internal Devices” later in this chapter.
Attaching Cables to Internal Devices
Inside your SuperMac C600x computer there is a SCSI ribbon cable
with four connectors between the motherboard and CD-ROM player
and two power cables available for use with additional internal
devices. Attach the SCSI ribbon cable connector and one 4-pin power
cable to each new device. Choose cables of a length most appropriate
for the location of your new device.