SAFETY INSTRUCTIONS
Make sure that the tow bar is suitable for the vehicle before starting the
installation. Verify that the vehicle's towing disposal quoted on the car registration
at the points D.1/ D.2 is mentioned on the tow bar document. Otherwise ask the
proper office for explanation or updated documents.
For safety, all work involving tow bar installation must be undertaken by skilled
technicians.
Damaged components must be replaced with manufacturer’s spares parts by
qualified staff.
It is forbidden to make any modification or structural repair to the tow bar.
USE AND MAINTENANCE
The tow ball must be kept clean and lubricated. For added safety, his diameter (50
mm) must be checked at regular intervals. If the tow ball measures less than 49
mm after selected readings across the diameter, the tow ball must be replaced
with a new one.
After 1000 km of towing, check torque settings for nuts and bolts, in accordance
with the table.
CAUTION
The tow bar installer must fix at the same level with the ball in a clear position, a plate
with the ball's maximum load for the vehicle on which the tow bar is fitted.
19020
- JEEP GRAND CHEROKEE -
v. 1.0
01/01/11
P. 2 / 6
