IMPORTANT NOTE. Occasionally we may release new software/firmware
upgrades/enhancements for this television. Please check the ‘firmware
upgrade’ section of the website regularly.
23
23
PC SETTINGS
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons. To confi rm
any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
Auto Adjust
- Lets you automatically confi gure the television to be used as a computer monitor
H Offset
- Changes the horizontal position of the picture
V Offset
- Changes the vertical position of the picture
Size
- increase picture size
Phase
- To adjust delay time of phase in order to reduce the noise of picture
Position Reset
- Changes back to the original settings
Tip: If the computer is left in-active for a period of time, the television will switch into a ‘sleep’ state
(the screen will power off to save power). To switch back on press the standby button.
AV
PC Operation
E-motion Manual No.3 M-star (CR).indd Sec1:23
E-motion Manual No.3 M-star (CR).indd Sec1:23
9/20/2010 2:40:08 PM
9/20/2010 2:40:08 PM
