KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE - DO NOT DISCARD
Uncle Milton Industries
Westlake Village, CA 91362
© 2008 UMI, Inc. All rights reserved.
Problems? Before taking this product back to the store, contact us. Call 1-888-742-2484 or go to www.unclemilton.com
2058-0208
How to operate
1. On the bottom of the base, select Mode 1 or Mode 2 (see Fig. 2).
a. Mode 1 turns rainbow on one color at a time.
b. Mode 2 turns rainbow on at once.
2. Press the button on top of the rainbow to turn it on/off (see Fig. 3).
3. If left on, the rainbow will turn off automatically after 10 minutes. If
you are using an AC adapter, the unit will remain on until the on/off
button is pressed.
Note:
In modes 1 or 2, the sensor is always drawing a small amount of
power. To prolong battery life switch to “OFF” during periods of non-use.
Fig. 3
ON / OFF
Fig. 2
How to operate
1. On the bottom of the base, select your desired illumination
mode — Mode 1 or Mode 2.
